Browse all practice questions for the Introduction to Nautical Science Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Introduction to Nautical Science Practice Test course image
All questions

These questions are part of the practice quiz. Start practicing

  • Which part of a vessel's rigging provides strong wire-rope support to a mast athwartships?
  • Why may a ship have different load line marks for different conditions?
  • Which licensed officer answers directly to the captain?
  • Freeboard is commonly used as an indication of which ship characteristic?
  • Which statement best describes the relationship between freeboard and reserve buoyancy?
  • Which rope material is known for substantial stretch and potentially dangerous snapback?
  • A pipe crosses the vessel from port side to starboard side. How is its direction described?
  • A crew member asks for the common term used aboard ship for small ropes. Which term should be used?
  • What is the role of a marine underwriter?
  • What is a sheave in a block used for?
  • What is the primary function of a ship's rudder?
  • When observing an anchored vessel, what should a watchkeeper do if the vessel appears to be dragging?
  • Which statement best describes how a sound paint coating helps protect steel?
  • Which organizations insure ships against loss?
  • What provides the upward force that supports a floating ship?
  • When a ship is floating in equilibrium, how does the weight of the displaced water compare with the ship's weight?
  • A hose is rigged from one side of a ship to the other. In what direction does it run?
  • Besides a licensed deck officer, how many additional crew members should meet the pilot?
  • Which action best describes how a tug helps control a large ship near a berth?
  • A line is described as having a particular lay. Which feature is being described?
  • A crew member is instructed to climb the main mast to inspect navigation lights. The crew member must go…
  • While on anchor watch, you observe the anchor chain repeatedly changing between heavy and light strain. What is the most likely concern?
  • In a block and tackle rigged to advantage, how is the hauling part led?
  • A bosun calls “Avast” while you are operating a lifeboat. What should you do?
  • In a 6 × 37 wire-rope construction, what does the first number, 6, indicate?
  • A watch stander believes the person arriving to relieve them is unfit for duty. What should the watch stander do?
  • Which term identifies a set of steps that may be vertical or inclined?
  • A block and tackle has an ideal mechanical advantage of 2 and is lifting a 600-pound load. How much pulling force is ideally required?
  • Which term describes the difference between a vessel’s loaded displacement and its light displacement?
  • Which knot is used to join a smaller-circumference line to a larger-circumference line?
  • To keep a rope end from passing through a fairlead, which knot is suitable as a stopper?
  • Which pair names two types of dry dock used to take a hull out of the water?
  • What is the purpose of a figure-eight knot at the end of a line?
  • A crew member must join two lines of unequal thickness. Which knot is the appropriate choice?
  • Before a crane lift, which check is important for safe operation?
  • What surface condition best helps primer adhere to steel?
  • A vessel’s port quarter is which area?
  • A vessel’s deadweight tonnage is 18,000 tons and its light displacement is 7,000 tons. What is its loaded displacement?
  • Which condition should be checked when inspecting wire rope?
  • In a 6 × 37 wire rope, what does the number 37 indicate?
  • When a ship is in port, where is the jack displayed?
  • What is the rotating wheel inside a rope block called?
  • What breaking strength is required for a line with an SWL of 4,000 pounds and a safety factor of 5?
  • Which material is commonly used to make natural-fiber line?
  • Where is a ship's ensign flown when the ship is in port?
  • What does a tagline help a crew member do during a crane lift?
  • What does intermodal transportation mean?
  • What is the purpose of spreaders fitted at intervals on a pilot ladder?
  • Approximately how many cubic feet of seawater does one long ton displace?
  • Why is the merchant marine important to a nation's economy?
  • A marked section of anchor chain has six white lengths, followed by a red length, then six white lengths. What does the marking denote?
  • Which location is used for a merchant ship's ensign in port, rather than underway?
  • During what period is a moored merchant ship's national ensign flown?
  • What is a key limitation of a square knot?
  • Which officer is the captain’s senior licensed subordinate?
  • Which of these natural-fiber ropes is generally the strongest?
  • What is the general MARPOL rule for disposing of plastic waste from a ship at sea?
  • Why should crew members stay clear of a suspended load?
  • What is the name for a strong wire rope that supports a mast athwartships?
  • A ship’s displacement is 42,000 tons when loaded and 15,000 tons when light. What is its deadweight tonnage?
  • What is the primary purpose of using a tagline when handling a suspended load?
  • Which major mode of transportation is generally considered the most flexible for moving freight?
  • What is the primary purpose of applying primer to properly prepared steel?
  • What does the command “Full rudder” indicate?
  • Among lines made with the same type of construction, which material generally has the greatest breaking strength?
  • Which pairing correctly identifies where the ensign is flown underway and in port, respectively?
  • What does a bowline form at the end of a line?
  • An engineer travels from the upper boat deck to the engine room. In nautical terms, the engineer goes…
  • What type of shackle is appropriate for securing a bosun’s chair while a person works aloft?
  • A deckhand needs to make a temporary eye at the end of a line. Which knot is best suited to this purpose?
  • For a vessel floating at rest, how does its weight relate to the water it displaces?
  • Which area is not designated as a MARPOL special area for ship garbage?
  • A vessel takes cargo without following a regular timetable. How is this type of ship classified?
  • A vessel is loaded so that its waterline lies beyond the applicable load line. What does this indicate?
  • What is a pilot ladder primarily used for?
  • Why is trucking often useful for the first or last leg of an intermodal shipment?
  • Who should meet a pilot when the pilot comes aboard?
  • What should be done to rusted steel before it is painted?
  • Who should sign an individual garbage record book entry under the stated watchkeeping procedure?
  • A bosun gives the command “Avast” during a lifeboat operation. Which response matches the command?
  • How many cubic feet are in one registered ton?
  • What is the becket on a block used for?
  • What does a vessel’s displacement measure?
  • Which knot is designed to act as a stopper at the end of a rope?
  • A line has a breaking strength of 35,000 pounds and a safety factor of 7. What is its safe working load (SWL)?
  • What is the two-horned steel fitting on a ship used to secure mooring lines called?
  • What is the purpose of freeing ports in a vessel’s solid bulwarks?
  • Which is not a standard component of paint?
  • Which type of dry dock is one of the two named methods for taking a hull out of the water?
  • A vessel is far offshore and outside a designated special area. May it discharge plastic waste there?
  • Which item is not part of natural line?
  • How do tugboats commonly assist a large vessel during mooring?
  • Which knot is commonly used as a stopper to keep a line from running through an opening?
  • What does the command “Anchor aweigh” indicate?
  • Where is a vessel’s quarter located?
  • A line has a breaking strength of 20,000 pounds and a safety factor of 4. What is its calculated maximum working load?
  • If anchor-chain markings show that four shots have been paid out, how many shots of chain are out?
  • Which visible defect is a warning sign during a wire-rope inspection?
  • What does the Hotel flag indicate when displayed by a vessel?
  • How is mechanical advantage calculated?
  • Which fitting is commonly used to tighten or adjust a deck-container lashing?
  • What is the main purpose of a mechanical advantage of 2 in a block and tackle?
  • Which statement best describes a helmsman’s other duties while steering?
  • A vessel has a loaded displacement of 30,000 tons and a light displacement of 10,000 tons. What is its deadweight tonnage?
  • What is the primary reason a ship must observe its applicable load line?
  • In an anchor-chain marking pattern of six white lengths, one red length, and six more white lengths, what quantity is indicated?
  • When an officer orders “hard right rudder,” how should the rudder be positioned?
  • What is the common nautical term for small ropes?
  • A ship has plastic waste that it cannot process onboard. What should the crew do?
  • What feature of shipping containers makes intermodal transportation practical?
  • Which MARPOL annex addresses garbage from ships?
  • Who may give an emergency stop signal during a crane operation?
  • What does the lay of a line describe?
  • Which type of shipboard waste is covered by MARPOL Annex V?
  • In general, what does greater freeboard provide a ship?
  • What is the purpose of a stopper used with a mooring line?
  • Why is a pilot ladder used with an accommodation ladder when a combination arrangement is required?
  • A crew member proposes throwing plastic packaging overboard during a voyage. What is the correct response?
  • Before a vessel gets underway, what is an essential part of securing for sea?
  • What is a ship operating without a fixed schedule commonly called?
  • What does the sheave do as a rope passes through a block?
  • What is a sheave in a block?
  • Why is a safety factor applied when determining a line’s safe working load?
  • Who inspects ships to assess their seaworthiness?
  • A vessel with solid bulwarks takes water onto its deck. Which feature helps remove that water?
  • How many pounds are in a long ton?
  • Why should a lookout be assigned no other duties while standing watch?
  • A ship has a loaded displacement of 24,000 tons and a deadweight tonnage of 9,000 tons. What is its light displacement?
  • Which statement correctly distinguishes a cleat from a stopper?
  • Which knot is commonly used to join two similar-sized line ends for light-duty purposes?
  • A helmsman receives the command “hard right rudder.” Which action follows that command?
  • What are the steel fittings with handles used to force the fittings of a watertight door called?
  • When a merchant ship is underway, where is its ensign flown?
  • What is the specified length of the accommodation-ladder spreader, also called a twist batten?
  • Which fitting is most directly associated with temporarily taking tension on a mooring line while it is being handled?
  • Which fitting has a handle and is used to force the fittings of a watertight door?
  • In a ship’s officer hierarchy, which position is directly subordinate to the captain?
  • What is the nautical term for a vertical or inclined set of steps?
  • Which signal flag indicates dangerous cargo aboard a merchant ship?
  • What does a ship’s load line indicate?
  • When must an accommodation ladder be rigged in combination with a pilot ladder for access from the water?
  • During a crane lift, whose signals should the operator normally follow?
  • When a merchant ship is moored, where is its national ensign flown?
  • Which knot should be selected when a line needs a temporary eye that will not slide tight under load?
  • Which fitting is commonly used on both ships and piers to secure mooring lines?
  • In rope construction, what does the term “lay” refer to?
  • A mooring line has a breaking strength of 12,000 pounds and a safety factor of 5. What is its maximum working load using the safety-factor calculation?
  • In the terminology used here, what is a rope larger than 1.75 inches in diameter called?
  • What is the main purpose of a turnbuckle in a container-lashing arrangement?
  • What does the applicable load line mark establish for a ship?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy